Engine and Exhaust System

• Engine Repair
• Oil Change
  Engines are properly run on our engine dynamometer to insure that the camshaft, bearings, rings, etc. have the correct break in procedure. The engine is monitored for oil pressure, air/fuel ratio, temperature, etc. After break in and oil change, the engine is tested for horsepower and torque.
• Exhaust System Repair
• Engine Services
  Cylinder Head Blueprinting, Los Angeles, High Performance Auto Services - Dyno Tuning, Honda Engine Services, LS1, LS2, LS7 Engines - Ford Modular Engines 4.6L, 5.4L, etc.
• Engine Diagnostic
  ENGINE DIAGNOSTIC SERVICE, High Performance Auto Services - Dyno Tuning, Honda Engine Services, LS1, LS2, LS7 Engines - Ford Modular Engines 4.6L, 5.4L, etc.
• Fuel Injection Service/Repair
  Carburetion and fuel injection systems are tested under actual running conditions using the chassis dynamometer. Under load, the fuel system and fuel curve are analyzed; fuel pressure and volume are checked for each application.

Tires

• Wheel Alignment

Electrical and Electronic

• Electrical Service/Repair
  Many performance and mileage problems can usually be traced directly to a weak or inadequate ignition system. To properly identify these problems, the vehicle is run on a chassis dynamometer and the ignition output is analyzed. Then we modify the distributor curve and install a custom wire set, coil or computer chip for improved performance and efficiency.