Interior

• Kitchen Remodeling
• Flooring
  Flooring – the first step in floor restoration is inspection, followed by cleaning to reveal damaged blocks. The damaged components are removed and recreated by an expert, then the new elements are installed and the entire flooring is sanded to restore its smoothness. In the final phase, a suitable finishing method is chosen and applied;
• Door Installation/Replacement
  While building remodeling and renovation usually involves the replacement of floors, doors and windows, the principle goal of restoration is preservation, therefore the methods used during the restoration process are different from the strategies used for remodels – here is what to expect...
• Drywalls
  Another important thing that you should do is repairing holes in walls. If the holes are rather small, you can use sticky fiberglass mesh and wall joints. If the hole is quite large, you can use a scrap piece of drywall. After that, you can repaint with the original color.  If you want a really special look for a specific room or even for the entire building, a bold decision would be to replace the old fixtures with replicas of the original.
• Basement Remodeling
• Tile Installation
  Perform a visual inspection first. Regardless of the type of the roof cover (fiber cement boards, asphalt shingles, metal shingles, concrete ceramic tiles etc.), make sure all the elements are still firmly fixed and replace those that are damaged or missing. Check the chimney, air vents, skylights and the flashing around them. If you notice some potential problems, talk to a specialist urgently, for a correct evaluation.
• Fireplaces
  Bricks can form a long-lasting structure for interior or exterior walls, fireplaces or chimneys. Even when the bricks are in a good state, the mortar between the joints can still get damaged in time. And because of that, tuckpointing done by Connecticut masonry experts can be very important.
• Staircases
• Garage Remodeling
• Skylight Repair/Replacement
  Metal parts are the most visibly affected by hail – check the gutters, the vents, the flashings in the roof valleys, around chimneys and around skylights for dents and cracks;

Construction

• Room Additions
• New Construction
• Demolition
  Restoration is a process similar to renovation, but its main goal is to make the building look like the original structure. Preserving and then using the potential of the old buildings could have as a final result a much lower consumption of resources and materials than demolition.
• Foundation Installation

Landscaping and Fencing

• Driveways
  One of the major benefits of masonry construction done by a precision masonry restoration Connecticut company is durability – masonry can be expected to stay strong for about a century –, but the prolonged exposure to water and salt might damage the mortar that joins the brick or stone components and compromise the strength of the masonry construction. Whether you have a masonry driveway, a masonry fence, a fireplace made from masonry or your building is made from masonry walls, having all the brick and stone structures inspected and, if necessary, repaired before winter is very important. Here is why...
• Snow Removal
  There are roofers with expertise in commercial roofing Connecticut has who offer emergency snow removal from your roofing system. Apparently, the most vulnerable type of roofing system is the flat roof. Despite the fact that many people consider that removing snow is a must, no matter the quantity, things are a bit more complex than that. Thus, it is best to remove snow only when it is absolutely necessary. Otherwise, the whole removal operation can be very dangerous, especially if done by inexperienced persons.
• Walkways
  We recommend that you always install appropriate and functional safety accessories on the roof, during restorations. Roof maintenance can be done in optimal conditions only when you have all the necessary safety equipment installed on the house: stairs, walkways, harnesses, safety railing systems, skylight screens and other fall arrest products.

Exterior

• Window Installation/Replacement
  Doors and windows – the process of restoring old doors and windows is very similar to the process of restoring the floor;
• Patios
  Outdoor living – while in the past, outdoor spaces around the house were taken up by patios, backyards and the occasional grill, the latest trends extended indoor functionality outdoors in areas where climate conditions are suitable for such an approach. Outdoor kitchens are already very popular and outdoor rooms are catching up quickly, too.
• Gutters
  Protecting your gutters and downspouts is another positive consequence of frequent roof maintenance. In case roof materials begin to break, they can get clogged in these parts of your home, making it difficult for rain water to travel safely down from your roof.
• Siding
  Preserving a building doesn`t involve adding materials or making repairs, but only performing some maintenance work to prevent further deterioration and making the building or targeted parts of it (roof, siding etc.) last as long as possible.
• Residential Roof Repair
  After the roof repair is done, you should inspect the work and make sure you are satisfied with it. Thoroughly inspect the roof and all the materials that were used during the project. Look for any blemishes or cracks in the roof and ask the roofer to address them if you find any.
• Residential Roof Replacement/Installation
  The frequency of leaks – leaks are the most common signs of roof damage, but quite often they are easy to fix. However, if you need to repair the same roof area over and over again and the leak just seems to come back after each rainy period, you probably need to start saving for at least a partial roof replacement;
• Commercial Roof Repair
  Commercial roofing maintenance, especially for large TPO or EPDM roofing systems, often requires specialized tools and equipment that your employees may not have access to or be familiar with. Professional roofers come prepared with the right gear, ensuring that the maintenance tasks are not only effective but also carried out efficiently.
• Commercial Roof Replacement/Installation
  Our expert team of highly skilled and trained craftsman are specialized commercial roofing contractors that have years of experience with roof, concrete, and building restoration in Connecticut.
• Residential Roof Inspection
  If the roof inspection reveals torn or uplifting shingles, prudent owners will call immediately a professional roofer to take a closer look and do the necessary repairs, before water gets the chance to infiltrate under the roof. If the water actually penetrates the roof, you are into a serious problem because it will start its destructive process and the roof will become more and more vulnerable, so do not ignore the emergency when you see it!
• Commercial Roof Inspection
  Commercial roofs need to be inspected for damage and problems just as residential roofs would. You have to make sure that your building is properly protected from the elements, and that’s the job of your commercial flat roof. Fortunately, the structure and construction of a commercial roof generally makes it easy for roofers to find any damage that could become a problem, and hidden damage is not often present.

General

• Painting
• Insulation
  Depending on the degree of renovation, you have to choose from several technical procedures, some more complicated (especially if you want to keep original, old elements), others quite basic (for example, changing the façade and performing insulation works). There are situations when building restoration works are needed only on certain elements of the building.
• Masonry
  Masonry restoration involves preserving and repairing aging masonry structures, such as buildings or walls. While some aspects of masonry restoration are well understood, there are several less-understood challenges that contractors may encounter.
• Caulking
  When deciding on a commercial roofer, you must evaluate the type of services offered. Ask the company you are contacting about the type of repairs it provides and determine the level of customer service it offers. Professional roofers usually provide additional services, such as caulking, gutter cleaning, or skylight installation.
• Electrical Work
  There is nothing worse than realizing that you need another source of light over the sink when the backsplash and the cabinet are already installed and the plates all sit nicely on the shelves. Design every process carefully – start with electrical work and plumbing, then move to the floors and the walls and leave the decorative elements and the furniture last, that way you can be sure everything is done the right way. If the renovation also involves large, exterior structural elements such as the roof, the gutters, the sidings or the doors and windows, start with those and move inside only when everything is fixed on the outside.

Pressure Washing

• Residential Pressure Washing
  If you’re looking for a masonry repair expert to restore an old building or put a new roof on your office building, look no further than one of the best masonry restoration companies in Connecticut. We can also handle all of your pressure washing, chemical cleaning, painting, caulking, tuck-pointing, lead and asbestos abatement, custom sheet metal work, and waterproofing. Check out our preventative maintenance program