What'sNearbyTM

What are you looking for?

Close Search
      We apologize for the inconvenience

      The people search feature on Superpages.com is temporarily unavailable. You can still search for people on yellowpages.com since Yellow Pages and Superpages are part of one company.

      You will be automatically re-directed to People Search on yellowpages.com in .

      Please note our privacy policy has changed. To view the policy, please go to https://corporate.thryv.com/privacy/

      Details

      Painting, Pressure Washing & Interior Finishing

      General Info

      "Quality Craftsmanship at an Affordable Rate, we are here for you and to help you realize the visions you have for your property."

      Hours
      Do you know the hours for this business?

      Contact Info

      Phone:

      Main - 320-760-0909

      MobilePhone - 320-760-1878

      Address:
      818 Jefferson St Alexandria, MN 56308
      Email:

      Reviews

      Be the first to review!
      Write a Review
      Categories
      Cabinets, Cabinets-Refinishing, Refacing & Resurfacing, Painting Contractors, Spray Painting & Finishing, Water Pressure Cleaning
      Services / Products
      Preparation Step by Step 1. Pressure Washing - if applicable - all areas will be power washed with a commercial grade power washer to remove all loose paint, dirt, mildew algae, dirt and/or salt deposits. If needed additional washing will be done by hand with a combination of bleach and detergent solution. 2. Coverings/Protection - all surface and landscaping areas will be covered with tarping prior to painting. We use “painting - tape” to protect areas that can not be covered with a tarp. 3. Remaining Loose Paint and Rust - will be removed with a hand scraper or wire brush. 4. Priming - all bare wood and metal will be primed with appropriate primers. Horizontal areas where water may sit and rusting exists will be given two coats of primer. 5. Caulking - joints and seams will be caulked anywhere that wood meets wood. A top grade latex caulk will be applied prior to painting. 6. Downspouts, Address Numbers, Mailboxes, etc - will be removed by the team prior to painting. Painting Step by Step 1. Aluminum Siding - will be sprayed to avoid brush strokes. We will add emulsa-Bond to help adhere paint to the surface Wood Siding - applications are on a home - to - home basis. Most houses will be sprayed but back rolled and brushed to receive maximum amount of paint on surface. Applications on wood siding will be outlined on each individual proposal/bid sheet. Wood Trim - will be painted by hand and worked into the wood grain. Stucco - will be sprayed but back-rolled and brushed to receive maximum amount of paint on surface. 2. Ladders and Walk Boards - will be used to prevent overlap marks. 3. First coat of paint or stain will be given sufficient time to dry. 4. Our team will clean up as it finishes each side of the home. All materials will be cleaned up and stored away before the end of the day.
      Payment Options
      debit, check, financing available, insurance
      Brands
      Sherwin Williams
      Location
      Give us a call we'll drive to you!
      Amenities
      Free Estimates, Insured & Registered with MN D.L.I. Warranty's
      Suggest an Edit
      Data provided by one or more of the following: Thryv, Data Axle, Yext.